8cavities 5gallon Cap Mold Plastic Injection Mold

• Shaping Mode: Injection Mould
• Surface Finish Process: Heat Treatment
• Mould Cavity: Multi Cavity
• Plastic Material: HDPE
• Process Combination Type: Compound Die
• Application: Daily Necessities
• Model NO.: DAE-C-8
• Runner: Hot Runner
• Design Software: AutoCAD
• Installation: Fixed
• Certification: CE
• Standard: PUNCH
• Customized: Customized
• Transport Package: Woden
• Specification: 550*560*950
• Trademark: NO logo
• Origin: China
• HS Code: 84807190

Product Description

THE MATERIAL OF THE MOLD

Mould cavity	S136 from Sweden ASSAB with HRC 50-52
Mould core	S136 from Sweden ASSAB with or M310 from Austria with HRC 52-55
Mould core sleeve	DC11 from Japan or W302 from Austria with 60-62HRC
Core Central Ejector	Beryllium Copper + Chroming treatment with HRC 62-64 HRC
Ejector way	Ejector plate+ Ejector sleeve
Mould Manifold plate	H13 from America for hot runner mold.
Mould other plate	P20
Hot runner system	hot runner
Free spare parts of mould	Core set : 1set/ cavity: 1 Piece/ hot runner system:1set/PID controller system: 1Set/ other easy broken spare parts for each 8 cavities cap mould.
Gurantee of the mould	1 year or 1 million shot times(in this period, if the mold have problem, we will offer the parts or service by free, but not include the problems cased by wrong operation)
The life of the mould	5-6 years, Even in 10 years in good maintenance
Installation & Commission	Our technician can be the buyer's factory to install and run the mould. But the buyer should bear all the cost for the technician's trip(include the air ticket, the cost of the accommodation and the salary)
Remark: Our mould different part will used different material. All the material was important and special for making cap mould. The mould material choice can make sure the mould action and mould running life

CONDITIONS:
TERMS OF PRICE: FOB NINGBO PRICE.
TERMS OF PAYMENT:30%THE TOTAL AMOUNT IN ADVANCE BY T/T. 70%THE BANLANCE BY L/C AT SIGHT OR BY T/T AFTER TEST AND ACCEPT THE MAHCINE AND MOULD IN THE SELLER'S FACTORY..
THE DATE OF DELIEVERY: 50-60DAYS AFTER GETTING THE DEPOSIT.
THE PORT OF DELIEVERY: NINGBO,CHINA

FAQ

Q: 1 Are you trading company or manufacturer ?

A: We are factory.
 

Q: 2 Where is your factory located?

A: Our factory is located in Huangyan, Taizhou city, Zhejiang Province, China.One hour from Taizhou airport by car, 15 minutes from train station to our factory.
 

Q: 3. How to go to your factory?

A: You can come to our city by flight, bus or train.
It takes 2 hours by flight from Guangzhou to our city.
It takes 3.5 hours by train from Shanghai to our city.
It takes 1 hour by bullet train from Ningbo to our city. 
 

Q: 4.How about quality control in your factory?

A: We believe "Quality is above everything". We have professional team to control the quality. Our QC team mainly do the following procedures:
      A) Design Optimize control 
      B) Mould steel hardness Inspection
      C) Mould assembly Inspection
      D) Mould trial report and samples Inspection
    E) Final inspection for mould & packing before shipmentIf you have another question, pls feel free to contact us as below:
 

Q:5. If i provide you 3d drawing of my product, can you quote the price & make the mould as per the 3d drawing?

A:Yes. 
      DWG, DXF, STEP, IGS and X_T files can all be used to quote price, make mould as per your models - This can save time and money in producing your parts.

Q: 6. What type of plastic material is best for my design/component?

A: Plastic Materials selection depends on the application of your product. We will give you some suggestion after we checked the function of your component. And we can make the mould trial with different material according to your requirement.

Q: 7. What kind of mould can you make?

A:  We can make all kinds of plastic injection moulds and blow moulds.
     We can suggest you the proper cavity number as per your injection machines sizes.
 

Q:8. What's your payment method?

A: By T/T, L/C, Trade Assurance, Western Union.